Management system of elevator triangle key

Management system of elevator triangle key

1, the triangle key must be trained and obtain special equipment operation certificate of the personnel to use. Other personnel shall not use.

2, the use of the triangle key must be accompanied by a safety warning sign or in the triangle lock hole around the warning sign;

Note that non-professional personnel are forbidden to use the triangle key and determine the position of the car when the door is opened.

3, The user or owner must designate one or more persons with certain mechanical and electrical knowledge as the elevator manager.

The elevator administrator shall be responsible for the daily management of the elevator; for units with a large number of elevators, the elevator administrator shall obtain special equipment operation certificate.

4, The elevator manager shall be responsible for collecting and managing elevator keys (including manipulation box, machine room door key, electric key).

Lock key, hall door unlocking triangle key); if there is a change of elevator manager, the triangle key should be handed over.

5, It is strictly forbidden for anyone to give the triangle key to the unrelated personnel without permission; otherwise, the accident will be caused and the consequences will be.

Otherwise, the consequences of accidents will be borne.

6, The correct use of the triangle key

(1) When opening the door of the hall, you should confirm the position of the car first; prevent the car from not being on this floor, which will cause the accident of stepping and falling.

(2) Open the lighting of the hall door.

(3) Turn on the lighting of the hall door, clear all kinds of debris, and pay attention to no other unrelated people around;

(4) Insert the triangle key into the unlocking hole, and confirm the direction of unlocking;

(5) The operator should stand up well and make sure the car is in the right place.

(6) The operator should stand well, maintain the center of gravity, and then unlock the door slowly in the direction of unlocking;

(7) After the lock is opened, push the door open a slit of about 100mm wide, remove the triangular key, and Observe the situation in the shaft, especially note that the hall door should not be opened too large at this time.

(8) After unlocking, the operator should confirm that the door is reliably locked.